The MS80W II is guaranteed to satisfy with its high-speeds, reduced profile, and proven integrated power and utility cable harness that ensures a reduced life cycle cost and increased cable life. The servo gun cables and air and water lines are routed through the upper arm and base of the robot to help expand the life of the cables, increase safety, and decrease the amount of time it takes to teach.
The aforementioned slim profile make it perfect for high density spacing and an easy integration into SpotWorld workcell. The MS80W II can handle up to 80 kg with a spot harness and 88 kg without one and has an expanded wrist motion range that improves application flexibility and helps to get rid of interference.
The benefits don't stop there, there is up to 70% less power consumption during active periods when compared to previous models. Also, the MS80W II is 30% faster than traditional size spot welding robots. There is a digital interface to help provide simple wiring to spot timers and enables weld programming from the robot pendant. The MS80 W II also has multiple functions to help to make the most out of the servo gun control: work thickness detection, multi-step pressure file, tip wear compensation, etc.
The MS80W II is paired with the DX200 controller and will be the perfect spot welder to add to your automation line.
For more information, contact a RobotWorx representative today at 740-251-4312
PRODUCT NAME |
Motoman MS80W II |
PRODUCT CODE |
|
CATEGORY |
|
Specification
Axes |
6 |
H-Reach |
2236mm |
Payload |
80kg |
Mounting |
Floor |
Structure |
Articulated |
Robot Mass |
558kg |
Repeatability |
±0.07mm |
Motion Range
J1 |
±180° |
J2 |
+155° - 90° |
J3 |
+160° - 185° |
J4 |
±205° |
J5 |
±120° |
J6 |
±180° |
Motion Speed
J1 |
170 °/s (2.97 rad/s) |
J2 |
140 °/s (2.44 rad/s) |
J3 |
160 °/s (2.79 rad/s) |
J4 |
230 °/s (4.01 rad/s) |
J5 |
230 °/s (4.01 rad/s) |
J6 |
350 °/s (6.11 rad/s) |