The answer to an increase in your production line's productivity is the 6-axis ABB IRB 4600-40. It can cut cycle times by up to 25% and achieve highest in its class speeds and acceleration.
Versatility at its finest, the 4600-40 has flexible mounting (floor, tilted, semi-shelf, or inverted) and is very compact. The compact design includes a slim swing base radius around axis 1, fine elbow behind axis 3, small lower and upper arms, and a very compact wrist. This allows you to place the robot closer to the served machines, further increasing your output and productivity. For these reasons and more, the IRB 4600-40 is sure to offer space saving options and ultimately help to shrink the footprint of your manufacturing cells.
In order to guarantee that your investment is protected, you can choose from a variety of options available such as Foundry Plus (IP67), resistant paint, rust protected mountain flange, and protection for molten metal spits on non-moving cables, and extra protection plates over the floor cable connections on the foot.
The IRB 4600-40 uses the advanced and intuitive IRC5 controller to help reach the aforementioned higher output and shorter cycle times; it will not disappoint.
For more information, contact a RobotWorx representative today at 740-251-4312
PRODUCT NAME |
ABB IRB 4600-40 |
PRODUCT CODE |
|
CATEGORY |
|
Specification
Axes |
6 |
H-Reach |
2550mm |
Payload |
40kg |
Mounting |
Floor, Inverted, Angle |
Structure |
Articulated |
Robot Mass |
412kg |
Repeatability |
±0.05mm |
Motion Range
J1 |
±180° |
J2 |
+150° - 90° |
J3 |
+75° - 180° |
J4 |
±400° |
J5 |
+120° - 125° |
J6 |
±400° |
Motion Speed
J1 |
175 °/s (3.05 rad/s) |
J2 |
175 °/s (3.05 rad/s) |
J3 |
175 °/s (3.05 rad/s) |
J4 |
250 °/s (4.36 rad/s) |
J5 |
250 °/s (4.36 rad/s) |
J6 |
360 °/s (6.28 rad/s) |